First of all, do you have the habit of cleaning your sneakers?
To be honest, cleaning your sneakers may seem like a hassle, but there are actually quite a few benefits to doing it.
In this article, we will use a heavily soiled "AIR FORCE 1 White" to introduce the benefits of cleaning and detailed instructions for doing so.
We will also explain how to use KicksWrap products, so we hope you will read to the end.
What you need to clean your Air Force 1
If you want to be even more particular
If you prepare the above four items as well as a few other things, you will be able to perform maintenance more perfectly.
We will explain how to use each product in the cleaning instructions below.
Air Force 1 Cleaning Practice
To clean your Air Force 1, follow the steps below:
- Set the shoe tree
- Remove the laces
- First, brush without applying anything.
- Cleaning with a cleaner
- Wipe off the dirty cleaner with a towel
- Washing removed shoelaces
- Dry thoroughly
For basic cleaning, the above 7 steps will be all you need.
We will explain each one in detail.
Set the shoe tree
First, insert the Deodorant Shoe Keeper.
By inserting a Deodorant Shoe Keeper, you can remove creases and restore the correct silhouette of your sneakers before cleaning.
In addition, the bristles of the brush can reach deep into creases that are normally difficult to reach, allowing you to remove dirt more efficiently.
The above points are not just for Air Force 1, but are basic sneaker cleaning tips to keep in mind.
Remove the laces
For simple cleaning, there is no problem with leaving the filter threaded through.
However, dirt tends to accumulate on shoelaces, especially in places that are not visible, and if left unattended the dirt will set in and require more work to remove later.
Whenever possible, it is best to remove them from your sneakers and clean them.
First, brush without applying anything.
First we will proceed with cleaning the uppers.
First, let's brush.
By first wiping off any light surface dirt, you can make subsequent cleaning easier and also save on cleaning materials.
This is a simple but important process, so be sure to do it properly.
Cleaning with a cleaner
After removing simple dirt with dry brushing, you can clean the shoes using the foam included in the Foam Shoe Care Kit.
The cleaning order is upper, midsole, and outsole.
As for the foam, you can either apply it to the brush or directly to the area to be cleaned.
This is a convenient item that allows you to clean without using water, significantly lowering the hurdle of cleaning.
The Foam Shoe Care Kit is one of KicksWrap's most popular products.
Wipe off the dirty cleaner with a towel
This is true for all sneaker cleaning detergents: if any detergent ingredients are left behind, it can cause yellowing due to a chemical reaction caused by oxidation , so it is important to wipe it off thoroughly.
That's where the Cleaning Microfiber Towel comes in handy.
The highly absorbent microfiber used is also used in beauty salons, allowing you to wipe away all traces of foam without leaving any residue.
+α process: Removing stubborn stains
Stains caused by friction or dirt that has become sunk into the surface may not be removable even by brushing with a cleaner.
In such cases, Utility Brush or Utility Eraser are useful.
The midsole and outsole Use the brass part of the Utility Brush or after the upper has dried Utility Eraser White makes it easy to remove tough stains.
Washing removed shoelaces
Rubbing the fabric is the most effective way to remove dirt without damaging the fibers.
If the area is particularly dirty, pinch it with your fingertips and rub thoroughly.
Dry thoroughly
When drying, it is essential to dry in the shade in a well-ventilated area .
Be careful not to expose your sneakers to direct sunlight, as it can damage them and cause them to yellow.
+α process: Recovering the unique luster of leather
Leather products naturally contain nutrients such as oils, which gives them their luster, but as they age and are cleaned, the nutrients are lost, and the leather gradually becomes cracked and dry.
To prevent them, Shoe Moisture Mist By maintaining your leather with specialized products such as the "Mouton Mitt," you can restore the leather's unique luster.
The usage is as follows:
- Spray Shoe Moisture Mist from about 15cm away.
- Press the Cleaning Microfiber Towel against the skin to allow it to soak in.
- Polish the surface by rolling the Mouton Mitt around.
Follow the above steps, and if the leather feels moist to the touch, it's OK.
summary
When you hear the word "cleaning," it may seem like a big hurdle, but I'm sure that after reading this article, not many people will find it difficult.
Once you do it, it's surprisingly easy, and with just a little effort you can make your sneakers last longer, so it's very economical.
By learning more about cleaning, you will be able to keep any sneakers you buy in the future in good condition, so why not take this opportunity to try sneaker cleaning?
You can also watch a video of this cleaning process, so if you're interested, be sure to check it out.
